Stainless Steel Turnbuckles — Marine Grade Rigging Screws
316 stainless steel turnbuckles from 3/16" to 1-1/2", with working loads from 100 to 17,000 lb. Jaw, eye,…
View →
Stainless steel knotted rope net — also called hand-woven cable mesh or sleeveless rope net — is a diamond-pattern flexible mesh. It is made from high-strength stainless steel wire rope (7×7 or 7×19 construction), hand-woven: each cable passes through the middle of the other and is twisted twice at every node to lock the knot — with no ferrule and no added hardware at all. We supply grades 304, 304L, 316 and 316L, with cable diameters from 1.0–5.0 mm and mesh apertures from 20×20 mm to 200×200 mm made to order. With zero hardware in the way, it is extremely transparent and virtually non-reflective against sky or buildings; the hand-locked knots keep the aperture constant and never slip.
rade infill.Mesh aperture is the net size after tensioning and varies slightly with tension and frame. Knotted rope net uses a square aperture: the cables are hand-knotted at every node, so opening width = height (unlike the ferrule type’s 60° diamond). Knotted and ferrule rope nets share the same cable physics; they differ only at the joint (knotted = hand-tied, no hardware; ferrule = crimped sleeve).
| Aperture (mm) | Cable Ø (mm) | Construction | Craft | Typical use |
|---|---|---|---|---|
| 25 × 25 | 1.2–1.6 | 7×7 | Knotted | Small birds, pigeon lofts |
| 30 × 30 | 1.2–1.6 | 7×7 | Knotted | Pigeon lofts, small birds |
| 40 × 40 | 1.2–2.0 | 7×7 | Knotted | Pheasants, ducks & geese |
| 50 × 50 | 1.2–2.0 | 7×7 | Knotted | Monkeys, small primates |
| 60 × 60 | 1.2–3.0 | 7×7 | Knotted | Cats, leopards, snow leopards |
| 75 × 75 | 1.2–4.0 | 7×7 | Knotted | Wolves, dogs, deer |
| 90 × 90 | 1.2–4.0 | 7×7 | Knotted | Big cats, bears |
| 100 × 100 | 1.2–4.0 | 7×7 | Knotted | Lions, tigers, horse/cattle fence |
Other specs: Material 304 / 304L / 316 / 316L (316 / 316L for coastal, humid); construction 7×7 (flexible) / 7×19 (high strength); craft hand-woven knotted (no ferrule, no hardware); finish natural / black oxidized / bronze; standard mesh angle 60° (30/70/75° available); panel width 0.5–10 m, length 1–20 m, irregular cut available.
Two technical guides cover the specification detail behind this mesh: